Inspire 1 Pro-Auto Take-off and Auto Landing

From DJI Wiki
Jump to: navigation, search

Auto Take-off

Use auto take-off to take off your aircraft automatically if the Aircraft Status Indicator displays blinking green. Follow the steps below to use auto take-off:

1. Launch DJI GO app, enter camera page.

2. Ensure the aircraft is in “P” mode.

3. Go through the pre-flight checklist.

4. Tap“Inspire Pro Max Height 2.jpg”, and confirm flight condition. Slide to confirm and take-off.

5. Aircraft takes off and hovers at 1.2 meters above ground.


Auto-Landing

Use auto-landing to land your aircraft automatically if the Aircraft Status Indicator displays blinking green. Follow the steps below to use auto-landing:

1. Ensure the aircraft is in “P” mode.

2. Check the landing area condition before tapping “Inspire Pro Max Height 3.jpg ”, to perform landing.

3. Aircraft lowers the landing gear and proceed to land automatically.

Tips:

Landing gear will automatically raise when the aircraft reaches an altitude of 1.2m for the first time, and automatically lower every time it descends to 0.8m. Users can turn this feature ON/OFF in the GO app.

Personal tools
Namespaces
Variants
Actions
Navigation
Phantom Series
Inspire 1 Series
Zenmuse X5 Series
Matrice Series
Guidance Series
A2 Series
WooKong-M Series
Spreading Wings Series
Aerial Gimbals
Handheld Gimbals
NAZA Series
Flame Wheel Series
Propulsion System Series
Ace Series
WooKong-H Series
Other Products
Toolbox