Inspire 1 Pro-Remote Controller Diagram
 Antennas: Relays aircraft control and video signal.
 Mobile Device Holder: Mounting place for your mobile device.
 Control Stick: Controls aircraft orientation.
 Return Home (RTH) Button: Press and hold the button to initiate Return to Home.
 Transformation Switch: Toggle the switch up or down to raise or lower the landing gear.
 Battery Level LEDs: Displays the current battery level.
 Status LED: Displays the power status.
 Power Button: Used to power on or power off the remote controller
 RTH LED: Circular LED around the RTH button displays RTH status.
 Camera Settings Dial: Turn the dial to adjust camera settings. Only functions when the remote controller is connected to a mobile device running the DJI GO app.
 Playback Button: Playback the captured images or videos.
 Shutter Button: Press to take a photo. If in burst mode, the set number of photos will be taken with one press.
 Flight Mode Switch: Used to switch between P, A and F mode.
 Video Recording Button: Press to start recording video. Press again to stop recording.
 Gimbal Dial: Use this dial to control the tilt of the gimbal.
 Mini-HDMI Port: Connect an HD compatible monitor to this port to get a live HD video preview of what the camera sees.
 Micro-USB Port: For connecting the remote controller to your computer.
 CAN Bus Port: Reserved for future use.
USB Port: Connect to mobile device to access all of the DJI GO app controls and features.
 GPS Module: Used to pinpoint the location of the remote controller.
 Back Left Button: Customizable button in DJI GO app.
 Power Port: Connect to a power source to charge the remote controller’s internal battery.
 Back Right Button: Customizable button in DJI GO app.