Main page

From DJI Wiki
(Redirected from Main Page)
This is the approved revision of this page, as well as being the most recent.
Jump to: navigation, search

You expressly agree that use of wiki.dji.com is at your sole risk. Neither DJI Innovations, subsidiaries, its other affiliates nor any of their respective employees, agents, third party content providers or licensors warrant that wiki.dji.com will be uninterrupted or error free; nor do they make any warranty as to the results that may be obtained from use of wiki.dji.com, or as to the accuracy, reliability or content of any information, service, or merchandise provided through wiki.dji.com.

Please send an email to DJI wikipedia mailbox: wiki@dji.com, if you have any suggestions regarding logic and content inside.


Support Center Contact Info

LOCATION SERVICE LINE CONTACT EMAIL OFFICE HOURS
DJI HEADQUARTERS +86 755 22673666 support@dji.com Monday to Friday , 9:00AM to 6:00PM (Hong Kong Time GMT+8:00)
DJI NORTH AMERICA +1 (818) 235 0789 us.support@dji.com Monday to Friday, 9:0AM to 5:00PM (Pacific Standard Time GMT-8:00)
DJI EUROPE +49 (0) 1803 354000* support.europe@dji.com Monday to Friday, 9:00AM to 5:00PM (German Time GMT+1:00)
*9 ct/min from the German fixed network, mobile telephone maximum price is 42 ct./Min.
(9 ct/Min. aus dem deutschen Festnetz, der Mobilfunkhöchstpreis liegt bei 42 ct./Min.)
*Tariffs may vary if you call from outside of Germany
DJI JAPAN Coming Soon! support.jp@dji.com Monday to Friday, 9:30AM to 6:00PM (Tokyo Time GMT+9:00)

Tip: If you bought your product from a DJI authorized dealer, we would recommend that you contact them first with regards to technical support issues.


Phantom Series


Phantom
The Phantom is an all-in-one small Quad Copter designed for multi-rotor enthusiasts. Before shipping from the factory, it has been configured and fully tested, which means you have no configuration to do. (We suggest that you watch the Installation Video first before move on.)

Phantom-Setup Wizard:

  1. Usage & Mounting InstructionsAircraft & TX Basic OperationSoftware and Driver InstallationConfiguration and Firmware& Software UpgradeLinking the Transmitter and ReceiverChanging the Control Mode of the Transmitter、【Installing the TX BatteriesTransmitter CalibrationBattery Charging-LiPo BatteryMounting the PropellersMount the Landing Gear with the Compass ModuleTurn on the TXPower on the AircraftGPS & Compass CalibrationMaintenance
  2. Flight TestingFlying FlowchartFlight TestEnhanced Fail-safeLow-Voltage AlarmIntelligent Orientation Control (IOC) FlightBefore You StartRecording Forward Direction & Home PointIOC Flying TestLED Indicator DescriptionESC Sound IntroductionTX State Introduction

Phantom -Toolbox:

Phantom-FAQ:


Phantom 2
The Phantom 2 features the same compact and highly integrated design, but comes with FPV flying and Aerial Photography support right out of the box.(We suggest that you watch the Installation Video first before move on.)

Phantom 2-Setup Wizard:

  1. Hardware InstallationPhantom 2 AircraftAttaching the PropellersPreparing the Remote ControllerPreparing the Flight Battery
  2. Software Installation and ConfigurationInstalling the Driver and Assistant SoftwareUsing the Phantom 2 Assistant Software on a PCFirmware UpgradePhantom RC Assistant Software Description
  3. Flight TestingCalibrating the CompassFlight

Phantom 2-Toolbox:

Phantom 2-FAQ:


Phantom 2 Vision
Phantom 2 Vision--your flying camera. Experience a new horizon of possibilities laid before you as you rise above the clouds. Capture the world around you and share these moments like never before. (We suggest that you watch the Installation Video first before move on.)

Phantom 2 Vision-Setup Wizard:

  1. Hardware InstallationAttaching the PropellersInstalling the Range Extender and Mobile Device HolderPreparing the Remote ControllerPreparing the Range ExtenderPreparing the CameraPreparing the Flight BatteryPHANTOM 2 Aircraft
  2. Installing SoftwareDownloading and Installing the DJI Vision AppConnecting to the CameraDJI Vision App UsageAssistant Software Installation and Configuration
  3. Flight TestingCalibrating the CompassFlight

Phantom 2 Vision-Toolbox:

Phantom 2 Vision-FAQ:


Phantom 2 Vision+
The Phantom 2 Vision+ ushers in a new era of aerial cinematography with its brand new and incredibly stable 3-axis gimbal , combined with the sharp, powerful DJI-designed camera, making professional imaging tools easily accessible to everyone. (We suggest that you watch the Installation Video first before move on.)

Phantom 2 Vision+ Assembly and Use:

  1. Hardware InstallationRemoving Gimbal ClampPreparing the BatteryPreparing the Phantom 2 Vision+Attaching the PropellersPreparing the Remote ControllerPreparing the Range Extender
  2. Installing SoftwareDownloading and Installing the DJI Vision AppConnecting the CameraDJI Vision App UsageDJI VISION App Main MenuCamera PageCamera SettingsAlbum PageNews PageSettings PageInstalling Assistant SoftwareUsing Assistant Software
  3. Flight TestingBefore FlightCalibrating the CompassStarting/Stopping the MotorsFlight TestFailsafe FunctionLow Battery Level Warning FunctionFlight Limits

Phantom 2 Vision+ Toolbox:

Phantom 2 Vision+ FAQ:


Phantom FC40
The Phantom FC40 is the beloved Phantom, all grown up. It comes with its own built in DJI designed smart camera with 720p/30fps HD video support, and iOS or Android app control.

Phantom FC40 Setup Wizard:

  1. Hardware InstallationAircraftTransmitterBefore FlyingUsing the DJI FC40
  2. Installing SoftwareDownloading and Installing the DJI FC40 AppConnecting the DJI FC40 AppDJI FC40 App FunctionsAssistant Software Installation and ConfigurationPHANTOM RC Assistant Software Description
  3. Flight TestingCompass CalibrationFlight TestIOC Function

Phantom FC40 -Toolbox:


Multirotor FC Systems & Spreading Wings Series


A2
DJI A2 multi-rotor stabilization controller is a complete flight control system for various multi-rotor platforms, for commercial and industrial AP applications. It opens an unprecedented era of precise positioning and perfect flight control in harsh environments for flight control systems. (We suggest that you watch the Installation Video first before move on.)

A2 Setup Wizard:

  1. Assembly and ConfigurationMixer Type SupportedHardware ConnectionAssembly and ConnectionInstall Driver and Assistant SoftwareUsing Assistant Software on a PCInstalling and running on Mac OS XConfiguration CheckingCompass Calibration
  2. Basic FlyingControl ModeFlying Environment RequirementsCheck List Before FlyingPower on and CheckStart MotorsFlying Test
  3. Protection Functions SettingFailsafeLow Voltage Protection
  4. Advanced FunctionsIntelligent Orientation ControlGimbal FunctionGear FunctionMulti-rotor One-motor Fail ProtectionLED Indicator Description

A2 - Toolbox:

A2-FAQ


WooKong-M
WooKong-M is a Autopilot System that designed for professional Multi-rotor Aircraft such as the hexa-rotor Spreading Wings S800. It is an important part of WooKong-M Waypoint. About Ground Station please see:WooKong-M ViewWooKong-M Waypoint for details. (We suggest that you watch the Installation Video first before move on.)

WooKong-M Setup Wizard:

  1. Hardware WizardPre-installation PreparationProduct SpecificationsMC MountingIMU MountingGPS MountingPMU MountingLed Indicator MountingWM Assistant for iosConnectionsServos Connection
  2. Parameters WizardAssistant Software InstallationFind Centre of GravityGPS/IMU Mounting Location SettingMotor MixerControl Mode Switch SettingR/C Transmitter CalibrationAutopilot SettingFailsafe SettingIntelligent Orientation ControlCamera Gimbal ControlVoltage MonitorGPS & Compass CalibrationR/C Transmitter SettingRemote Parameters Tuning
  3. Flight WizardFlight TestingPre-installation PreparationTest FlyGPS Attitude Mode FlightEnhanced FeaturesFlight Limits SettingWooKong-M LED Indicator

WooKong-M - Toolbox:

FAQ

WooKong-M Single Waypoint
WooKong-M Single Waypoint needs to be used with WooKong-M, its updated version is WooKong-M Waypoint.

WooKong-M Single Waypoint Setup Wizard:

  1. Mounting WizardWooKong-M MountingData LinkGround Station Software
  2. Using WizardView Mode ProceduresSystem SettingAltitude Offset SettingData Record FolderFlight SimulationOne Key TakeoffKeyboard/Joystick Control ModeClick & Go Mode

WooKong-M Single Waypoint - Toolbox:

FAQ

WooKong-M Waypoint
WooKong-M Waypoint needs to be used with WooKong-M, its simplified version is WooKong-M Single Waypoint. (We suggest that you watch the Using & Demonstrating Video first before move on.)

WooKong-M Waypoint Setup Wizard:

  1. WooKong-M Setup Wizard
  2. Using WizardView Mode ProceduresSystem SettingAltitude Offset SettingData Record FolderFlight SimulationOne Key TakeoffKeyboard/Joystick Control ModeClick & Go ModeWaypoint ModeAuto Takeoff & LandingF Channel ControllerGeneral Purpose Servo Action (GP-Servo Action)Six Pre-Programmed Route TemplatesPhotogrammetry ToolList of Ground Station Shortcut KeysWireless Data-link Specification and Data-link LED Introduction

WooKong-M Waypoint - Toolbox:

FAQ

Spreading Wings S800
Spreading Wings S800 is a professional Hex-rotor Aircraft, and needs to be used with WooKong-M Autopilot System. (We suggest that you watch the Installation Video first before move on.)

Assembly:

  1. Center Frame WiringMount Center Frame、mount WooKong-M on Spreading Wings S800How to Mount WooKong-M on S800Mount Frame ArmsEVO Frame ArmMount Bi-podMountingMount Battery BracketMount MotorsVibration Absorber KitSpare Parts List
  2. Mount Zenmuse Z15 gimbal on Spreading Wings S800How to Mount Zenmuse Gimbal on S800
  3. The case study of Ruling R/C TX and Spreading Wings S800 used in Aerial Photography、Reconnaissance and other professional field

Spreading Wings S800:

FAQ

Spreading Wings S800 EVO
Spreading Wings S800 EVO is a multi-rotor designed for aerial photograph which integrates reinforced mechanical structures, stabilized dynamical system and high-efficiency power supply. (We suggest that you watch the Installation Video first before move on.)

Assembly:

  1. Frame AssemblyCenter Frame WiringAttach Electric EquipmentMount Frame ArmsInstallationInstall the IMU Mount
  2. Mount Landing GearAssembly & ConnectionTravel CalibrationTransmitter SettingUsageMount Battery Bracket

Spreading Wings S800 EVO-Toolbox:

Spreading Wings S800 EVO-FAQ:


Spreading Wings S900
The Spreading Wings S900 is designed for professional aerial photographers and cinematographers. Its lightweight, compact design makes it easy to take anywhere and create amazing aerials on the go. (We suggest that you watch the Installation Video first before move on.)

AssemblyMounting the Landing GearMounting Frame ArmsMounting Electronics and WiringConnecting XT60 Ports on Center FrameInstalling BatterySetting up the Landing GearMounting the Gimbal


Spreading Wings S900-Toolbox:

FAQ


Spreading Wings S1000
Spreading Wings S1000 octocopter has been specially designed for high level professional aerial photography and cinematography. (We suggest that you watch the Installation Video first before move on.)

AssemblyMounting Landing GearMounting Frame ArmsMounting Electronics and WiringConnecting XT60 Ports on Center FrameInstalling BatterySetting Landing GearMounting the Gimbal


Spreading Wings S1000-Toolbox:

FAQ



Professional Gimbal Systems


Zenmuse Z15-BMPCC
The DJI Zenmuse Z15-BMPCC gimbal represents a breakthrough in Zenmuse precision, offering a control range of just ±0.01°. Used with a DJI A2 professional flight controller and a professional DJI aerial system, it will keep the BMPCC stable and controllable even in strong winds or intense maneuvers. (We suggest that you watch the Installation Video first before move on.)

Zenmuse Z15-BMPCC Setup Wizard:

  1. Mounting Wizard : Gimbal DescriptionMountCamera Wiring/Record ControlVideo Signal TransmissionGCU Wiring
  2. Setting WizardWorking Modes/AUX1/AUX2 Switch SetupAssistant Software Installation and UsagePre-flight Check

Zenmuse Z15-BMPCC - Toolbox:

Zenmuse Z15-BMPCC - FAQ:


Zenmuse Z15-5D
The DJI Zenmuse Z15-5D Gimbal, based on the technology of the Zenmuse Z15 series gimbal, inherited its predominant strength/weight ratio because of its unique structural design. This release marks another breakthrough in gimbal systems and the precision range of the control angle is within ±0.02°. When used with DJI A2 professional flight controller and an Octo-copter, it will remain stable and precisely with the highest level of stability in controlling any camera equipment even if the aircraft is in strong wind or at high speed. Undeniably, it is the top choice in professional filming or aerial photography.(We suggest that you watch the Installation Video first before move on.)

Zenmuse Z15-5D Setup Wizard:

  1. Mounting Wizard : Gimbal DescriptionCamera SetupMountingCamera Wiring/Shutter ControlVideo Signal TransmissionThe GCU Connection
  2. Setting WizardWorking Modes/AUX2/AUX3 Switch SetupAssistant SoftwareTest

Zenmuse Z15-5D - Toolbox:

Zenmuse Z15-5D - FAQ:


Zenmuse Z15-5D III HD
The DJI Zenmuse Z15-5D III HD Gimbal is a sophisticated gimbal designed specifically for aerial creativity. Its HD video output port and lightweight design enable you to capture beautiful, stable shots for all of your high-level projects.(We suggest that you watch the Installation Video first before move on.)

Setup Wizard:

  1. Mounting Wizard : Gimbal DescriptionCamera SetupMountCamera Wiring/Shutter Control360° Panoramic Photograph FunctionAuto-calibration FunctionVideo Signal TransmissionGCU Wiring
  2. Setting WizardWorking Modes/AUX1/AUX2/AUX3 Switch SetupPC Assistant TuningPre-Flight Check

Zenmuse Z15-5D III HD - Toolbox:

Zenmuse Z15-5D III HD - FAQ:


Zenmuse Z15-GH3
The DJI Zenmuse Z15-GH3 Gimbal, based on the technology of the Zenmuse Z15 series gimbal, is another breakthrough in gimbal systems with a 5 fold increase in control Precision. The precision of the control angle is within the range of ±0.01°, so picture or video output can reach the best quality. (We suggest that you watch the Installation Video first before move on.)

Zenmuse Z15-GH3 Setup Wizard:

  1. Mounting Wizard : Gimbal DescriptionCamera SetupMountingCamera Wiring/Shutter ControlVideo Signal TransmissionGimbal Controller Wiring
  2. Setting WizardWorking Modes/HDMI/AUX2 Switch SetupAssistant SoftwareZenmuse Z15-GH3-1-Plilot SolutionZenmuse Z15-GH3-2-Plilot SolutionTest

Zenmuse Z15-GH3 - Toolbox:

Zenmuse Z15-GH3 - FAQ:

Zenmuse Z15-GH4 (HD)
The DJI Zenmuse Z15-GH4 (HD) gimbal, an upgraded version of the popular Zenmuse Z15-GH3, represents a breakthrough in Zenmuse precision, offering a control range of just ±0.01°.(We suggest that you watch the Installation Video first before move on.)

Zenmuse Z15-GH4 (HD) Setup Wizard:

  1. Installation : Gimbal DescriptionCamera SetupMountCamera Wiring/Shutter ControlMounting a GH3 Camera onto the Z15-GH4Video Signal TransmissionGCU Wiring
  2. SettingsWorking Mode/AUX2 Switch SetupPC Assistant Tuning1-Plilot Solution2-Plilot SolutionPre-Flight Check

Zenmuse Z15-GH4 (HD) - Toolbox:

Zenmuse Z15-GH4 (HD) - FAQ:

Zenmuse Z15
Zenmuse Z15 Gimbal is a milestone gimbal system which is developed for professional filming, aerial photography for commercial use. Even if aircrafts are in a fast-speed flight, it can still stabilize and control the camera equipment precisely with highest stability.

Zenmuse Z15-N/Z15-G Setup Wizard:

  1. Mounting Wizard : Gimbal DescriptionCamera SetupMountingCamera Wiring/Shutter ControlVideo Signal TransmissionGimbal Controller Wiring
  2. Setting WizardWorking Modes/HDMI Switch SetupAssistant SoftwareZenmuse-1-Plilot SolutionZenmuse-2-Plilot SolutionTest

Zenmuse Z15-N/Z15-G - Toolbox:

FAQ


Zenmuse H3-2D
The DJI ZenmuseH3-2D Gimbal is another milestone in gimbal innovation, which is designed for the GoPro Hero3. With its high precision, high stability, lightweight, plug and play features, it is widely used in film and television productions, advertising aerial photography, etc. (We suggest that you watch the Installation Video first before move on.)

H3-2D Setup Wizard:

  1. Mounting WizardGimbal DescriptionGimbal InstallationCamera InstallationGimbal WiringVideo Signal Transmission
  2. Setting WizardAssistant SoftwareFirmware & Software UpgradeTesting

H3-2D -Toolbox:

H3-2D -FAQ:


Zenmuse H3-3D
The 3-axis H3-3D gimbal takes the unparalleled 3-axis stabilization of professional Zenmuse systems and brings them to the GoPro Hero 3 and 3+ for smoother Phantom videos than ever before. It is easy to install, lightweight and ideal for everything from extreme sport to filmmaking. (We suggest that you watch the Installation Video first before move on.)

H3-3D Setup Wizard:

  1. InstallationGimbal DescriptionGimbal InstallationCamera InstallationGCU ConnectionVideo Connection
  2. ConfigurationDriver and Assistant Software InstallationFirmware & Software UpgradeTest Fly

H3-3D -Toolbox:

H3-3D -FAQ:

Ronin
Developed for the filmmaking professional, the DJI Ronin marks a generational leap in camera stabilization technology. Its custom sensors, powerful motors and advanced algorithms put world-class precision in your hands.(We suggest that you watch the Installation Video first before move on.)

Ronin Setup Wizard:

  1. Installation : Gimbal DescriptionSmart BatteryTuning StandInstalling the Handle Bar onto the GimbalSmart Battery InstallationMounting the CameraHandle Bar AdjustmentBalancing
  2. SettingsDJI Ronin Assistant App TuningPC Assistant TuningRemote ControlOperation Modes

Ronin - Toolbox:

Ronin - FAQ:



Hobby Line
Naza-M
This is an Autopilot System designed for hobby Multi-rotor Aircraft pilots, it is always used with Flame Wheel series. (We suggest that you watch the Installation Video first before move on.)

Naza-M Setup Wizard:

  1. Hardware WizardPre-installation PreparationProduct SpecificationsMC & GPS MountingConnectionsReceiver Connections
  2. Parameters WizardAssistant Software InstallationFind Centre of GravityGPS/IMU Mounting Location SettingMotor MixerControl Mode Switch SettingR/C Transmitter CalibrationAutopilot SettingFailsafe SettingIntelligent Orientation ControlCamera Gimbal ControlVoltage MonitorGPS & Compass CalibrationRemote Parameters Tuning
  3. Flight WizardPre-flight PreparationFlight TestingGPS Attitude Mode FlightNaza-M LED Indicator

BTU Module SetupiOSD mini Setup

Naza-M - Toolbox:

FAQ


Naza-M-V2
This is an Autopilot System designed for hobby Multi-rotor Aircraft pilots, it is always used with Flame Wheel series. (We suggest that you watch the Installation Video first before move on.)

Naza-M-V2 Setup Wizard:

  1. Hardware WizardPort DescriptionConnection
  1. Parameters WizardSoftware and Driver InstallationConfiguration by Assistant Software
  1. Basic FlyingCompass CalibrationAssembly Checking ListBefore FlightFlying Test
  1. Advanced FunctionFlight Control ModeStart & Stop MotorFailSafeLow-Voltage ProtectionIntelligent Orientation ControlLED Description

2.4G BT Datalink & iPad Ground StationBTU Module SetupiOSD mini Setup

Naza-M - Toolbox:

Naza-M-V2 FAQ:


Flame Wheel
Flame Wheel is a series of Multi-rotor Aircraft designed for hobbyists, it is always used with WooKong-M or Naza-M. (We suggest that you watch the Installation Video first before move on.)

Flame Wheel Series: F550F450F330

  1. F550 Assembly WizardF550 AssemblyF550 ESC and Motor MountingF550 Propeller Mounting
  2. F450 Assembly WizardF450 AssemblyF450 ESC and Motor MountingF450 Propeller Mounting
  3. F330 Assembly WizardF330 AssemblyF330 ESC and Motor MountingF330 Propeller Mounting
  4. F550(Hexa-rotor Aircraft) and F450、F330(Quad-rotor Aircraft) are usually used with Naza-M Autopilot System, How to Mount Naza on Flame Wheel F450
  5. Mounting the Tuned Propulsion System E300 on Flame Wheel 450、Instructions
  6. Mounting the DT7 & Dr16 RC System on Flame Wheel 450、Instructions

Flame Wheel F550/F450/F330 - Toolbox:

FAQ

Naza-H
The Naza-H Autopilot System is a new platform designed for the helicopter model enthusiast. From novice to aggressive 3D, the Naza-H perfectly meets the needs of different flying styles. It is not just another FBL controller; it is the best choice for the discerning model helicopter pilot. (We suggest that you watch the Installation Video first before move on.)

Naza-H Setup Wizard:

  1. Hardware WizardConnectionsSoftware Installation
  2. Setting WizardAssistant Software UsageCompass CalibrationAuto TrimControl Mode
  3. Flight WizardManual Mode Test FlightAttitude Mode Test FlightGPS Attitude Mode Test Flight

Naza-H Toolbox:

FAQ

WooKong-H/WooKong-H Lite
This is an Autopilot System designed for hobby Single Rotor Helicopter pilots.

WooKong-H/WooKong-H Lite Setup Wizard:

  1. Hardware WizardPre-installation PreparationIMU MountingGPS MountingReceiver ConnectionServos ConnectionMain Controller MountingLED Indicator MountingConnections
  2. Parameters WizardAssistant Software MountingFind Centre of GravityGPS/IMU Mounting Location SettingControl Mode Switch SettingFlybarless SettingSwashplate SelectingPitch and Throttle Curve SettingTail Gyro SettingGovernor SettingR/C Transmitter CalibrationSystem CheckAutopilot SettingCompass Calibration
  3. Flight WizardManual Flight TestingFailsafe SettingAutopilot Flight Testing

WooKong-H - Toolbox:

FAQ


Ace Series
Ace One
Ace One is DJI’s latest achievement in GPS/INS based helicopter Autopilot System. From aerial filming, surveillance, to wide area surveying, Ace One’s exceptional performance excels in the most demanding industries and environments. It is an important part of Ace series of ground station system. About Ground Station please see Ace ViewAce Single WaypointAce Waypoint for details.
(We suggest that you watch the Installation Video first before move on.)

Ace One Setup Wizard:

  1. Hardware WizardPre-installation PreparationIMU MountingGPS MountingReceiver ConnectionServos ConnectionMain Controller MountingConnections
  2. Parameters WizardAssistant Software MountingFind Centre of GravityGPS/IMU Mounting Location SettingControl Mode Switch SettingFlybarless SettingSwashplate SelectingPitch and Throttle Curve SettingTail Gyro SettingGovernor SettingR/C Transmitter CalibrationSystem CheckAutopilot SettingCamera Gimbal ControlCompass Calibration
  3. Flight WizardManual Flight TestingFailsafe SettingAutopilot Flight Testing

Ace One -Toolbox:

FAQ

Ace View
Ace View needs to be used with Ace One, its updated version is Ace Single Waypoint.

Ace View Setup Wizard:

  1. Mounting WizardAce One MountingData LinkGround Station Software
  2. Using Wizard View Mode ProceduresSystem SettingAltitude Offset SettingData Record Folder

Ace View -Toolbox:

FAQ

Ace Single Waypoint
Ace Single Waypoint needs to be used with Ace One, its updated version is Ace Waypoint.

Ace Single Waypoint Setup Wizard:

  1. Mounting WizardAce One MountingData LinkGround Station Software
  2. Using WizardView Mode ProceduresSystem SettingAltitude Offset SettingData Record FolderFlight SimulationKeyboard/Joystick Control ModeClick & Go Mode

Ace Single Waypoint -Toolbox:

FAQ

Ace Waypoint
Ace Waypoint needs to be used with Ace One, its simplified version is Ace ViewAce Single Waypoint. (We suggest that you watch the Installation Video first before move on.)

Ace Waypoint Setup Wizard:

  1. Hardware WizardPre-installation PreparationIMU MountingGPS MountingReceiver ConnectionServos ConnectionMain Controller MountingConnectionsData Link
  2. Software WizardAssistant Software InstallGround Station Software
  3. Parameters WizardFind Centre of GravityGPS/IMU Mounting Location SettingControl Mode Switch SettingFlybarless SettingSwashplate SelectingPitch and Throttle Curve SettingTail Gyro SettingGovernor SettingR/C Transmitter CalibrationSystem CheckAutopilot SettingCamera Gimbal ControlCompass Calibration
  4. Flight WizardManual Flight TestingFailsafe SettingAutopilot Flight Testing
  5. Using WizardView Mode ProceduresSystem SettingAltitude Offset SettingData Record FolderFlight SimulationKeyboard/Joystick Control ModeClick & Go ModeWaypoint ModeAuto Takeoff & LandingF Channel ControllerGeneral Purpose Servo Action (GP-Servo Action)Six Pre-Programmed Route TemplatesPhotogrammetry ToolList of Ground Station Shortcut KeysWireless Data-link Specification and Data-link LED Introduction

Ace Waypoint -Toolbox:

FAQ


Other Products


DJI Lightbridge 2.4G Full HD digital video downlink
DJI Lightbridge is a revolutionary 2.4G Full HD digital video downlink offering extremely powerful technology in a small and lightweight form. By offering 1920 x 1080p video data transmission from up to 1.7km (1.05miles) away, it's the ideal solution for professional aerial creators and FPV users. (We suggest that you watch the Installation Video first before move on.)

DJI Lightbridge Setup Wizard:

  1. InstallationAir System IntroductionGround System IntroductionCablesAir System InstallationGround System Installation
  2. ConfigurationPower OnIndicator DescriptionUsing DJI LightbridgeApp Settings

DJI Lightbridge -Toolbox:

DJI Lightbridge -FAQ:


iOSD(On-Screen Display)
DJI iOSD is specially designed for DJI Autopilot System, such as WooKong-M, Ace One during the FPV Flight or other aero-modeling activates. (We suggest that you watch the Installation Video first before move on.)

iOSD-Mounting and Using Wizard:

  1. iOSD-Setup Wizard:Mounting Steps,ConnectionsIOSD-Three Position Switch Setting,Video Signal Output Port DescriptionVideo Signal Input Port DescriptionPort Description
  2. Using WizardTestOperation InstructionPower VoltageChannelDistance Aircraft to HomeHeightControl ModeFail-safe ModePitch AttitudeRoll AttitudeAttitude LineFlight VelocityGPS SatelliteVideo InputVertical Velocity

iOSD mini Setup

iOSD - Toolbox:

FAQ


S800 Retractable Landing Gear
The retractable landing gear is designed for the S800 frame in order to provide a better perspective in aerial-filming / photography work. By using a 2-position switch channel of the R/C transmitter, you can control the landing gear to retract remotely. The retractable landing gear will not block the view of the camera lens, making smooth shooting in all directions possible. (We suggest that you watch the Installation Video first before move on.)

S800 Retractable Landing Gear-Setup Wizard:

  1. Hardware WizardServo InstallationMechanical AssemblyElectrical Connections
  2. Setting WizardTravel CalibrationR/C Transmitter (TX) SettingUsage

S800 Retractable Landing Gear-Tool Box:

FAQ


Top Article

About Flight Controller:Intelligent Orientation Control(IOC) | Failsafe | Auto RTH/Landing | GPS & Compass | IMU | Internal Damping

About Ground Station:Ace View | WooKong-M Single Waypoint | Ground Station

About Frame/Gimbal/RC: Multi-axis Aircraft | Tail Gyro | Brushless Motor | ESC

Personal tools
Namespaces
Variants
Actions
Navigation
Phantom Series
A2 Series
WooKong-M Series
Spreading Wings Series
Aerial Gimbals
Handheld Gimbals
NAZA Series
Flame Wheel Series
Ace Series
WooKong-H Series
Other Products
In other languages
Toolbox