Naza-M

From DJI Wiki
Jump to: navigation, search
Naza
Naza-m infobox.png
PlatformMulti-rotor
SizeMC:45.5mm x 31.5mm x 18.5mm
GPS&Compass(Optional):46mm (diameter) x 9mm
VU:32.2mm x 21.1mm x 7.7mm
WeightMC:25g
GPS&Compass(Optional:21.3 g
VU:20g
Power ConsumptionMAX:1.5W(0.3A@5V)
Normal:0.6W(0.12A@5V)
Working VoltageMC:4.8V ~ 5.5V
VU:7.2V ~ 26.0 V
(recommend 2S ~ 6S LiPo)
Operating Temperature-10°C to 50°C
FunctionsMax Yaw Angular Velocity 190°/s
Max Tilt Angle 45°
Ascent / Descent ±6m/s
Packing ListMC x 1
GPS&Compass(Optional) x 1
VU x 1
USB Cable x 1
3-Pin Cable x 8
3M Gummed Paper x 4

NAZA is a lightweight multi-rotor control platform specially designed for aeromodel hobbyists. It is a small all-in-one module which combines the MC, a gyro, accelerometer, and a barometric altimeter. With optional GPS & Compass module, accurate position-lock feature has been included. It has D-Bus support, upgrade support, and extendible port. Different from WooKong-M for heavy payloads and aerophotography, Naza not only inherits the outstanding flight stability of DJI products, but also provides excellent maneuverability, which gives hobbyists wonderful flight experience.

Naza simplifies installation and saves space and weight. With the innovative All-in-One design, Naza contains inner damping, controllers, 3-axis gyroscope, 3-axis gyroscope and barometer in its light and small main controller. Naza can measure flying altitude, maintain and therefore can be used for autopilot/automatic driving. Advanced mix guidance algorithm and control algorithm, inherits outstanding flight stability of DJI products, provides excellent maneuverability, gives hobbyists wonderful flight experience. Naza-M GPS & Compass will greatly enhance performance for entry AP with position hold, return-to-home and intelligent orientation control. With GPS Module, the multirotors will have position and altitude lock in windy conditions. Precise hovering in less than 2.5m horizital and and 0.8m vertical.

In order to prevent your multi-rotor from crash or other harmful consequences caused by low battery voltage, we have designed two levels of low voltage protection. You can choose to not to use them, however we strongly recommend to open the protections! Naza supports six different multi-rotor model, Meet the different needs of the enthusiasts. The gimbal stabilization module is compatible with almost all 2-axis gimbal systems. The system will adjust the gimbal and camera according to the attitude of the helicopter after setting the parameters the first time.


Contents

Before Mounting and Testing

For your safety when mounting, testing and using Naza, please read the precautions carefully.


Features

  • All-in-One Design
    NAZA simplifies installation and saves space and weight. With the innovative All-in-One design, NAZA contains inner damping, controllers, 3-axis gyroscope, 3-axis gyroscope and barometer in its light and small Main Controller.
  • Advanced attitude stabilize
  • Multiple flight control mode/intelligent switching
    Naza-M offers three types of control modes : GPS Atti. Mode(with GPS module), Atti. Mode, Manual Mode. Customer can switch among the three modes to adjust different flight environment even in the specially weak GPS environment.
  • GPS Module Available/Accurate Position hold
    Naza-M GPS will greatly enhance performance for entry AP with Position Hold, Return-To-Home and Intelligent Orientation Control.
  • Intelligent Orientation Control
  • Failsafe
    Naza controller has built-in auto level Fail-Safe function. That means when the communication between MC and transmitter is disconnected, the outputs of all command sticks from controller will go to center point .


Mounting and Testing

The mounting of Naza hardware is very easy, just follow the indtructions in the User Manual to connect the 3-PIN servo cables with the RC receiver, and the ESC to the VU module. But you have to pay attention to the installation direction, there is a red-tasselled spear in the logo of Naza and it must point to the nose direction of the aircraft.

Mounting Wizard
MC & GPS Mounting
Assembly
Connections

Here we provide an example of how to mount Naza on the Flame Wheel F450.

When the hardware installation is completed, you still need to calibrate and set the RC before fly.

Setup Wizard
R/C Transmitter Settings
Parameter Settings
Flight Testing
Remote Parameters Tuning
Camera Gimbal Control
Voltage Monitor


When all the installation and testing are completed, congratulations, you can fly your Multi-rotor Aircraft with Naza.

Related Products

You can get better flight performance use Naza on the following DJI products.

Flame Wheel F330

Flame Wheel F450

Flame Wheel F550

Spreading Wings S800

ESC

Motor

Propeller

Naza, a Chinese Mythological Novel Apotheosis Hero

Naza-picture.png

Naza Conquers the Dragon King

  The story opens with a powerful general by the name of Chentang Pass. His wife,after a three-year long pregnancy, gives birth to a ball of flesh shaped like alotus bud. Believing this to be an ill omen,Li Jing chops open the ball with a single swipe of his mighty sword. A beautiful boy-child springs out.

  The Great Monad comes to offer his congratulations He finds the boy to his liking, so he takes him as a disciple and names him Naza. He then gives him two magic weapons:the Firmament Ring ang the Armillary Sash.

  One day when Naza is seven years old he goes to the nearby seashore for a swim. There he encounters a patrolling Yasha demon who is stealing children to feed his master, the Dragon King. Naza wounds the Yasha demon with his Firmament Ring and tries to save a little girl from its clutches.In arage ,the Dragon King sends his third son to capture Naza. But the son is killed instead. Now completely infuriated, the Dragon King hitches up with the dragon kings of other seas ang unleashes a raging storm, wreaking havoc on Chentang Pass and demanding Naza's magic weapons. Not wanting to involve others in any further misery, Naza commits suicide. Thus freed from its physical confinement, Naza's spirir in a lotus flower and transforms the flower into an exact duplicate of the original Naza. Now with his newly acquired fire-tipped spear in hand and a pair of fire-and-wind wheels under his feet, Naza heads straight for the Dragon Palace.In a final indignant fury, he turns the palace upside down and beards the Dragon King.



Naza-picture1.png


Personal tools
Namespaces
Variants
Actions
Navigation
Phantom Series
A2 Series
WooKong-M Series
Spreading Wings Series
Aerial Gimbals
Handheld Gimbals
NAZA Series
Flame Wheel Series
Ace Series
WooKong-H Series
Other Products
In other languages
Toolbox