Naza-M-Firmware Upgrade

From DJI Wiki
Jump to: navigation, search

Please strictly follow the procedure for firmware upgrade, otherwise autopilot system might not work properly.

STEP1: Make sure your computer is connected to the Internet.

STEP2: Please close all the other applications during the firmware upgrade, including anti-virus software and firewall.

STEP3: Make sure the power supply is securely connected. DO NOT un-plug the power supply until firmware upgrade has finished.

STEP4: Connect MC to PC with micro-USB cable, DO NOT break connection until firmware upgrade is finished.

STEP5: Run Software and wait for connection.

STEP6: Select TOOLFirmware Upgrade.

STEP7: Server will check your current firmware version, and get the latest firmware prepared for the unit.

STEP8: If there is a firmware version more up-to-date than your current version, you will be able to click the Upgrade button.

STEP9: Wait until Assistant software reads finished.

STEP10: Click OK and power cycle the unit after at least 5 seconds.

Your unit is up-to-date now.

Notices:

  • After firmware upgrade, please re-configure by Assistant software.
  • If it is notified that the network or server is busy, please try again later with above procedures.
  • If firmware upgrade failed, MC will enter waiting for firmware upgrade status automatically, please try again with the above procedures.
Personal tools
Namespaces
Variants
Actions
Navigation
Ace Series
A2 Series
WK-M Series
Spreading Wings Series
Zenmuse Series
WK-H Series
NAZA Series
Flame Wheel Series
Accessory Product
Ready-to-Fly Aircraft
In other languages
Toolbox