Phantom

From DJI Wiki
Jump to: navigation, search


Phantom
PHANTOM-pic.png
Operating Temperature-10°C ~ 50°C
Take-off Weight<1000g
Hovering Accuracy (GPS Mode)Vertical:± 0.8m;Horizontal:± 2.5m
Max Yaw Angular Velocity200°/s
Max Tilt Angle45°
Max Ascent / Descent Speed±6m/s
Max Flight Velocity10m/s
Diagonal distance (motor center to motor center)350mm
Working Current /Voltage52 mA@6V

The PHANTOM is an all-in-one small Quad Copter designed for multi-rotor enthusiasts. Before shipping from the factory, it has been configured and fully tested, which means you have no configuration to do.

Contents

Built-in

  • NAZA-M Autopilot System

(Refer to NAZA-M manual for details)

  • GPS & Compass Module
  • R/C Receiver
  • Power System for Flight
  • LED Indicator
  • USB Interface(in the Battery Compartment)

Function

  • ATTI./GPS ATTI. Mode
  • Intelligent Orientation Control
  • Enhanced Fail-Safe
  • Low-voltage Alarm

Camera Frame (For Gopro)

  • Please mount the Camera and Camera Frame if necessary.
  • (1)Mount the Camera to the Camera Frame

Phantom-gopro mount.png

  • (2)Mount the Camera and Camera Frame to the aircraft
  • Make sure to use the dedicated cross screws of the type M3.0*6, since an over long screw will puncture the battery by passing through the battery compartment and could lead to explosion or fire.

Phantom-en-7.png

Charger

  • AC Input: 100-240V
  • Charge Circuit:1A/2A/3A
  • Current Drain for Balancing: 200mA
  • Circuit Power:20W (@2A)

Battery:LiPo(2200MAH-20C-11.1V)

  • Working Frequency: 2.4GHz ISM
  • Control Channel Numbers of TX: 6
  • Communication Distance: 300m
  • Receiver Sensitivity(1%PER): >-93dBm
  • Power Consumption of TX: <20dBm
  • Working Current/Voltage: 52 mA@6V
  • AA Battery (5#): 4 Required


Personal tools
Namespaces
Variants
Actions
Navigation
Phantom Series
A2 Series
WooKong-M Series
Spreading Wings Series
Aerial Gimbals
Handheld Gimbals
NAZA Series
Flame Wheel Series
Ace Series
WooKong-H Series
Other Products
In other languages
Toolbox