Phantom 2 Vision-Firmware Upgrading of the 5.8G Remote Controller

From DJI Wiki
Jump to: navigation, search

The 5.8G remote controller of the PHANTOM 2 VISION uses the PHANTOM RC Assistant software to upgrade firmware. Users should connect the Micro-USB port

of the remote controller to the USB port of the PC via a Micro-USB cable. The Micro-USB port is inner the remote controller and users have to open the

rear cover of the remote controller to find it.


1. Remove the 4 screws which fix the rear cover of the remote controller and open the cover carefully to avoid breaking the power cables.

2. Make sure the remote controller has inputbatteries and then connect the remote controller to PC via a Micro-USB cable. The connection of the remote controller is shown as below.

P2v-Firmware upgrading of the 5.8G RC-en.png

3. Turn on the remote controller and run the PHANTOM RC Assistant software, wait the remote controller connecting to the Assistant software.Then users can upgrade the firmware of the remotecontroller to in the Info page. Click the link Latest version:1.0.2.22 to upgrade following the prompts.

P2v-Firmware upgrading of the 5.8G RC11-en.png

Tips: Click Here to download the PHANTOM RC Assistant software.

Personal tools
Namespaces
Variants
Actions
Navigation
Ace Series
A2 Series
WooKong-M Series
Spreading Wings Series
Zenmuse Series
WooKong-H Series
NAZA Series
Flame Wheel Series
Accessory Product
Ready-to-Fly Aircraft
Toolbox